Phosphate Rust Converter, Antiruster Series, 250 ml ASTROHIM

Phosphate Rust Converter, Antiruster Series, 250 ml

ASTROhim phosphate rust converter creates a strong protective phosphate film, turning the metal corrosion products into a hard coating, which serves as the basis for further painting.

Protects the surface from further corrosion.

Areas of use
The composition is used to protect the surfaces of automobile parts, building metal structures, hangars and roofs, pipes, water pipes, oil and gas pipelines, bridges and hydraulic structures, overpasses and platforms, construction vehicles, railway vehicles, agricultural machinery and other metal products operated in a moderate industrial atmosphere, tropical and cold climates.

It is actively used by automobile, metallurgical, engineering, shipbuilding enterprises, construction and repair companies, as well as enterprises of the energy and oil and gas complex, etc.


Recommendations for use
Before use, it is necessary to prepare the surface: clean from dirt, remove loose and exfoliating rust with a metal brush, dry and degrease the surface.

Shake the bottle vigorously for one minute and apply the composition with a brush in 2 layers. Ambient temperature should not be lower than +10 ° C. Stand on the surface for at least 20 minutes. Then it is recommended to rinse thoroughly with water and check the treated surface for traces of corrosion. If necessary, repeat the treatment.

Before applying paints and varnishes, it is recommended to dry the surface well and apply them within 24 hours after treatment with a rust converter.

Expense of funds
Depending on the application method. On one layer with an area of ​​1 m2 - from 100 to 320 g.