$28.31
On Hold
ABRO Flowable Silicone Sealant 85g
10 available
Details
Shipping: Australia: free (more destinations)
Condition: Brand new
Returns: 7 days, buyer pays return shipping (more)
Flowable Silicone Sealant
• Flows into Hard to Reach and Hidden Areas
to Stop Leaks
• Seals Glass, Metal, Wood, Plastic and a
Variety of Other Surfaces
• Resistant to Weather and Extreme
Temperatures up to 205°C
It has vibration and thermal stability.
It is not destroyed under the influence of most automotive and household fluids.
It takes any form and successfully withstands compression, tension and shear.
Designed for use at temperatures from -65 to 206 ° C.
A specially developed composition with increased fluidity penetrates deep into cracks and gaps, followed by the formation of a transparent, durable, waterproof layer. Suitable for repairing surfaces of glass, metal, wood, plastic, rubber, ceramics.
Mode of application:
1. The surface must be clean, dry and fat free.
2. Remove the cap, pierce the protective membrane and screw on the nozzle.
3. Cut the tip of the nozzle to the required size.
4. Apply sealant to the surface to be repaired.
When repairing leaks of rubber seals for automobile windows, bend the seal from glass and the body.
When repairing aquariums, apply sealant from the inside. Remove excess sealant with a paper towel or rag.
5. After 15–20 minutes after application, check the result. If the leak does not stop, apply sealant again.
Complete hardening of the sealant occurs after 24 hours.
• Flows into Hard to Reach and Hidden Areas
to Stop Leaks
• Seals Glass, Metal, Wood, Plastic and a
Variety of Other Surfaces
• Resistant to Weather and Extreme
Temperatures up to 205°C
It has vibration and thermal stability.
It is not destroyed under the influence of most automotive and household fluids.
It takes any form and successfully withstands compression, tension and shear.
Designed for use at temperatures from -65 to 206 ° C.
A specially developed composition with increased fluidity penetrates deep into cracks and gaps, followed by the formation of a transparent, durable, waterproof layer. Suitable for repairing surfaces of glass, metal, wood, plastic, rubber, ceramics.
Mode of application:
1. The surface must be clean, dry and fat free.
2. Remove the cap, pierce the protective membrane and screw on the nozzle.
3. Cut the tip of the nozzle to the required size.
4. Apply sealant to the surface to be repaired.
When repairing leaks of rubber seals for automobile windows, bend the seal from glass and the body.
When repairing aquariums, apply sealant from the inside. Remove excess sealant with a paper towel or rag.
5. After 15–20 minutes after application, check the result. If the leak does not stop, apply sealant again.
Complete hardening of the sealant occurs after 24 hours.
RU, RUSSIAN FEDERATION