HI-GEAR BUMPER COATING FLEXIBLE black 311g

It allows you to quickly and efficiently restore color and paint plastic parts of the car body, completely dries in 1 hour.

Appointment: for bumpers, moldings and other plastic body parts.

Action: creates an elastic, durable coating that matches the factory. It has high adhesion to bumper materials and exterior parts made of thermoplastics, polyurethane, and dense rubber.

Use the drug at ambient temperatures from +15 to +30 ° C.

Check the paint and solvent for compatibility with the material to be painted in a small inconspicuous area. Protect the unprocessed surface from dust.

Clean the surface. Grind with sandpaper No. 6–10 or coat with a special abrasive sponge.
Degrease with white spirit or other non-aggressive solvent.
Thoroughly mix the paint in the bottle, shaking it for 2-3 minutes until a clear knock of balls appears.
Apply 2–3 thin coats, spraying the paint in even strips from a distance of 15–25 cm. It is advisable that each subsequent strip overlap the previous 2–3 cm. Intermediate drying between coatings is 15 minutes. Full drying - 1 hour.
Shake the bottle periodically during operation.
Avoid smudging.
After use, turn the spray can over and press the spray valve for 1–2 seconds to clean the nozzle.
If necessary, after applying the paint, “Fine Polishing Paste” can be used, but not earlier than 20 days after processing.