ABRO EPOXY PLATICS 14ml

Description:
two-component, cream-colored epoxy adhesive in a syringe.

Scope of application:
Designed for bonding various types of plastic (PVC, Plexiglas, ABS plastic, metal), as well as vinyl, wood, ceramics, porcelain, glass, metal, wood, etc.
Properties:
• ideal for joining plastic and metal parts together;
• resistant to most liquids;
• a special applicator provides automatic mixing of components during extrusion;
• does not shrink, does not expand upon curing;
• setting after 15 minutes.

Clean and degrease the parts to be bonded.
Remove the plastic fuse located between the pistons.
Hold the syringe with your nose up. Pull the pistons out slightly and let the air bubbles rise.
Remove the tip of the dispenser.
Put the nozzle on the dispenser by pressing and turning it 90 °. Make sure the nozzle is attached.
Press the pistons and squeeze the right amount of glue.
After use, remove the nozzle and remove any remaining adhesive from the dispenser. Pull the pistons a little, close the spout with a cap.
It sets in 1 minute, complete hardening occurs in 1 hour.