PERMATEX Super 300 Form-A-Gasket Sealant 118ml 4oz

Adhesive sealant -
it is a black flowing liquid with a characteristic odor
alcohol. Fast drying, non-hardening,
semi-flexible sealant for all types of structures with
gaskets or without them. Remains sticky after
evaporation of the solvent.
ADVANTAGES
• For use in all types of gaskets
• Does not harden
• Seals threaded connections and hoses
• Has excellent oil resistance
• Easy to use
APPLICATION AREA
• Compressors
• Diesel engine heads
• Main gears
• Gear boxes
• Power supplies
• Piston gears
• High speed turbochargers
DIRECTIONS FOR USE
For use as a shaper
gaskets in place
1. Remove remnants of previous materials from
surfaces to be joined. For most
materials other than plastics and painted
surfaces, it is recommended to use
Permatex Gasket Cleaner
2. For best results, clean
surfaces with a non-sludge
solvent such as Permatex Cleaner
brakes and parts and dry them
3. Apply a thin and even layer of the product to
both surfaces. First outline the inner
contour gasket, then apply sealant around
bolt holes as shown below:
4. Let dry for 5-10 minutes.
5. Reconnect the parts immediately while the product remains
wet. Tighten the bolts to the correct torque.
Incubate the assembled block for 1 hour at room temperature.
temperature before starting it
use.
Note: Light heating will shorten the
hardening.