$69.36
On Hold
WURTH HHS LUBE 500ml
10 available
Details
Shipping: Australia: free (more destinations)
Condition: Brand new
Returns: 7 days, buyer pays return shipping (more)
Spray grease HHS LUBE
Long-acting aerosol grease with extreme pressure additives based on OMC2 technology
Low adhesion to dust and dirt
Excellent for lubrication of mechanisms and assemblies working outdoors
Longer lubricant life
Excellent insulating properties
Long time between relubrications
Resistant to splash water and salt water, withstands weak acids and alkalis
Excellent corrosion protection
Lubricant is not washed off by rain
Resistant to oxidation
Resistant to high compressive loads on lubricated surfaces
Excellent pressure resistance thanks to the addition of EP (ultra high pressure) additives
High attenuation of noise and vibration
Minimizes wear and loss due to friction and heating of the lubricated surface
Thermoplastic anti-aliasing technology (OMC2) increases lubricity
Reduced friction temperature, resulting in longer service life
Low wear rate
Dries quickly to provide effective lubrication and protective film
Resistant to water, steam, acids and alkalis
Thanks to the extension tube, precise dosing and spraying is possible even in hard-to-reach places
Can be used while the mechanism is in operation, since hands will be outside the danger zone
Free from silicone, resins and acids
Specifications
Base oil: synthetic petroleum jelly / lithium soap Solid lubricant: OMC2 Heat resistance: -25 ... + 150 ° C, temporarily up to + 175 ° C Color: milky green Density at 20 ° C: 0.77 g / ml Dropping point: 150 ° C Flash point (s solvent / solvent free): -20 / 240 ° C NGLI class: 2 Wear factor SRV (DIN 51834): 153 SKF Emcor corrosion protection (DIN 51802): 0-1
Mode of application
Spray grease on the lubrication point. The grease easily penetrates even the smallest gaps and holes and thickens.
Application area
Serves open gears, sprockets, chains, steel ropes, guides and cables. The grease forms a sealing “lubricant ring” to keep moisture and dirt out between the guide and the slide. This achieves a long-term lubrication effect. In this case, relubrication is only possible after preliminary cleaning of the lubricated surface with the HHS cleaner art. 0893.106.10.
Long-acting aerosol grease with extreme pressure additives based on OMC2 technology
Low adhesion to dust and dirt
Excellent for lubrication of mechanisms and assemblies working outdoors
Longer lubricant life
Excellent insulating properties
Long time between relubrications
Resistant to splash water and salt water, withstands weak acids and alkalis
Excellent corrosion protection
Lubricant is not washed off by rain
Resistant to oxidation
Resistant to high compressive loads on lubricated surfaces
Excellent pressure resistance thanks to the addition of EP (ultra high pressure) additives
High attenuation of noise and vibration
Minimizes wear and loss due to friction and heating of the lubricated surface
Thermoplastic anti-aliasing technology (OMC2) increases lubricity
Reduced friction temperature, resulting in longer service life
Low wear rate
Dries quickly to provide effective lubrication and protective film
Resistant to water, steam, acids and alkalis
Thanks to the extension tube, precise dosing and spraying is possible even in hard-to-reach places
Can be used while the mechanism is in operation, since hands will be outside the danger zone
Free from silicone, resins and acids
Specifications
Base oil: synthetic petroleum jelly / lithium soap Solid lubricant: OMC2 Heat resistance: -25 ... + 150 ° C, temporarily up to + 175 ° C Color: milky green Density at 20 ° C: 0.77 g / ml Dropping point: 150 ° C Flash point (s solvent / solvent free): -20 / 240 ° C NGLI class: 2 Wear factor SRV (DIN 51834): 153 SKF Emcor corrosion protection (DIN 51802): 0-1
Mode of application
Spray grease on the lubrication point. The grease easily penetrates even the smallest gaps and holes and thickens.
Application area
Serves open gears, sprockets, chains, steel ropes, guides and cables. The grease forms a sealing “lubricant ring” to keep moisture and dirt out between the guide and the slide. This achieves a long-term lubrication effect. In this case, relubrication is only possible after preliminary cleaning of the lubricated surface with the HHS cleaner art. 0893.106.10.
RU, RUSSIAN FEDERATION