TOTEK MK-02 Complex additive in engine oil 250ml

The preparation TOTEK MK-02 is designed to increase the strength of the oil film of fresh oil, increase its flash point, enhance the antiwear and extreme pressure properties of the oil (tribological characteristics) and the HTHS parameter. The drug helps to increase the strength of the oil film, prolongs its resource capabilities, protects the thickener from premature destruction under the influence of mechanical and thermal loads. Provides enhancement of the working properties of the oil, allowing the vehicle to operate under increased loads, when driving on the highway at high speed and with a large load. The use of TOTEK MK-02 will not have the maximum expected effect in cases where the engine oil has already lost its protective properties (worn out by mileage> 8-10 thousand km). If you have no time to change the engine oil in time, and current affairs require you to continue driving, it is better to use TOTEK MK-01 in aged oil.
Method of application Warm up the engine to operating temperature (opening the thermostat), turn off, check the oil level according to the instructions. Open the oil filler neck and pour in the TOTEK MK-02 preparation preheated to room temperature at the rate of 50 ml of the preparation per 1 liter of fresh engine oil filled into the crankcase of your car. Close the oil intake, start the engine and let it idle for 5 minutes. Stop the engine by letting the oil drain into the crankcase and check the level. In the case of using the machine in conditions of high ambient temperatures and heavy loads, sports competitions, the dosage can be increased to 100 ml per 1 liter. engine oil. As a result of natural loss of oil due to its waste caused by the special properties of the oil (low-quality oil or incorrectly matched to the engine), design features of the engine or special operating conditions, TOTEK MK-02 can be used as a universal top-up to any type of engine oil to the required level ...