WURTH REPLAST EASY FAST 50ml

Suitable for almost all types of plastics
No large assortment of adhesives required
Used for repair and structural bonding
A special gun, art. 0891.893.485 and mixing tube art. 0891.486 for glue
Optimum adhesive mixing at minimum consumption
Minimal adhesive loss
Fast curing
Further processing is possible in a minimum amount of time
Excellent chemical resistance
Resistant to many fluids (e.g. gasoline) and many oils (ethyl acetate)
Does not contain solvents

Specifications
Chemical base: two-component polyurethane
Color: black Density: 1.25 g / ml
viscosity: about 18000 mPas
Shore hardness D: 69
Tensile Strength (ASTM D-638): 26 MPa
Tensile and shear strength (EN 1465): 20 MPa (sheet)
Elongation to break: 63%
Layer thickness: optimally 0.5 ... 2 mm, max. 5 ... 7 mm
Processing time: 1.5 min
Working strength: after 5 min
Full polymerization: 10 min
Final strength: after 20 min
Application temperature: +15 ... + 25 ° C
Temperature resistance: -30 ... + 100 ° C, temporarily up to +150 ° C
Flash point: 93 ° C

Application area
It is part of the complete system for the repair of plastic parts Replast Easy art. 0893.500.0. Examples of use: passenger cars - spoilers, radiator grilles, various clips, bumpers, headlight and radiator mountings, etc .; trucks and buses - mud flaps, bumpers, air intakes, wheel arches, etc .; motorcycles - various fastening elements.