$77.86
On Hold
WURTH Copper spray 400 ml
More than 10 available
Details
Shipping: Australia: free (more destinations)
Condition: Brand new
Returns: 7 days, buyer pays return shipping (more)
High layer thickness after one application
Optimum weather protection
Fast application in one operation
Good coverage
Flexible use thanks to the adjustable spray head
Can be applied to large and small surfaces
High safety of the application process
After application on the surface of the products, the color of the coating repeats the color of copper
Can be painted with clear varnishes for better surface protection
Good adhesion to various materials: metals and plastics
Does not run off vertical surfaces
Based on moisture resistant acrylic resin with pure copper pigment
High wear resistance of the coating
Suitable for spot welding
400 ml spray is enough to cover approximately 4 m² of surface
Specifications
Chemical basis: cellulose nitrate
Color: copper
Density: 0.75 g / cm³
Adhesion test (DIN 53151): GT0-1
Layer thickness in one pass, after drying: ~ 36 microns
Film appearance time (at the recommended layer): 6 min
Complete drying time (at the recommended layer): 90 min
Waiting time of the product before use (at the recommended layer): 17 min
Heat resistance: up to ~ + 100 ° C
Shelf life at temperatures from +10 ... + 25 ° C: 24 months
Suitable for exterior painting: yes (preliminary testing required)
Surfaces with good adhesion: steel, copper
Mode of application
The surfaces to be treated must be clean, dry and free from grease. Remove rust and old paint residues. Shake the can thoroughly before use, for about two minutes. Spray the product from a can onto the surface to be treated. The recommended spray distance is 15–20 cm. If necessary, recoat after 6 hours.
Application area
It is used to improve the appearance, repair and corrosion protection of metal surfaces. It is used for the installation of heating and plumbing systems assembled from copper pipes.
Attention!
Not applicable as a base for sealants and other formulations based on polyurethane, MS and hybrid polymers
Optimum weather protection
Fast application in one operation
Good coverage
Flexible use thanks to the adjustable spray head
Can be applied to large and small surfaces
High safety of the application process
After application on the surface of the products, the color of the coating repeats the color of copper
Can be painted with clear varnishes for better surface protection
Good adhesion to various materials: metals and plastics
Does not run off vertical surfaces
Based on moisture resistant acrylic resin with pure copper pigment
High wear resistance of the coating
Suitable for spot welding
400 ml spray is enough to cover approximately 4 m² of surface
Specifications
Chemical basis: cellulose nitrate
Color: copper
Density: 0.75 g / cm³
Adhesion test (DIN 53151): GT0-1
Layer thickness in one pass, after drying: ~ 36 microns
Film appearance time (at the recommended layer): 6 min
Complete drying time (at the recommended layer): 90 min
Waiting time of the product before use (at the recommended layer): 17 min
Heat resistance: up to ~ + 100 ° C
Shelf life at temperatures from +10 ... + 25 ° C: 24 months
Suitable for exterior painting: yes (preliminary testing required)
Surfaces with good adhesion: steel, copper
Mode of application
The surfaces to be treated must be clean, dry and free from grease. Remove rust and old paint residues. Shake the can thoroughly before use, for about two minutes. Spray the product from a can onto the surface to be treated. The recommended spray distance is 15–20 cm. If necessary, recoat after 6 hours.
Application area
It is used to improve the appearance, repair and corrosion protection of metal surfaces. It is used for the installation of heating and plumbing systems assembled from copper pipes.
Attention!
Not applicable as a base for sealants and other formulations based on polyurethane, MS and hybrid polymers
RU, RUSSIAN FEDERATION