WURTH HP Radiator Sealant 150ml

Can be used in closed cooling systems
Suitable for all common antifreezes
Eliminates micoscopic leaks (up to 0.1 mm) in the cylinder head and hose connections
Dirt strainers in the cooling system do not clog
Eliminates evaporation loss in heat exchangers, radiators and accessories
Increases operational reliability and protects against mechanical damage due to loss of coolant
The product works effectively until the next replacement of antifreeze
Microscopic synthetic particles provide a sealing effect

Specifications
Chemical basis: ethanediol
Color: blue
Density at 20 ° C: 1.01 g / ml
Ash content: 0.05%
PH value: 9
Evaporating temperature: 100 ° C


Mode of application
With a warm engine, the sealant is injected directly into the cooling system. Fill the expansion tank only when the coolant is pumped through it. Run the engine for at least 10 minutes. Then turn off the engine, check the coolant level and top up if necessary. The contents of the bottle are sufficient for 10 liters of liquid.

Application area
In case of microscopic leaks, seals the gaskets in the cylinder head and hose connections; used in cases of losses from evaporation in the cooling system, when replacing antifreeze.

Attention!

Conventional radiator sealants should not be used on modern crossflow cooling systems to avoid clogging of the strainer, which can lead to radiator malfunction.