Additive CUPPER for all types of automatic transmissions 1000ml

Auto energetic CUPPER for all types of automatic transmissions is intended for use as an additive to automatic transmission fluids or, without fail, when switching to CUPPER transmission oil for automatic transmissions.

Compatible with all types of automatic transmission fluids (Dexron, Mercon, Mopar ATF, CVT). Does not change their physical and chemical properties. It completely dissolves deposits of wear products, forms a protective copper film and partially or completely restores the surfaces of working parts in friction pairs.

Application results:
Elimination of problems with incorrect gear changes;
Reducing the noise level from the operation of the unit;
Improving the dynamic and economic characteristics of the vehicle;
Increased service life of the unit.
Attention! Before use, energy drinks must be warmed to room temperature and shaken!
The content of the additive (1 l) is designed for the treatment of a unit with an oil system volume of 100 liters.

Mode of application:
At the first application: 1000 - 1500 km (30 - 50 mth) before the scheduled oil change in an automatic transmission, the calculated amount of the additive (10 ml (0.01 l) per 1 l of fluid) is placed in the lubrication system of the unit. After completing the preparatory stage, replace the fluid and oil filter in the unit. With subsequent use, the additive will last for the entire service life of the transmission fluid.

In case of further use of CUPPER ATF2 + transmission fluid, additional use of the additive in the lubrication system of the unit is not required!