ABRO EPOXY STEEL 60-min 57g

Description:
two-component epoxy adhesive with a reinforcing additive of steel powder.

Scope of application:
Designed for bonding metals (copper, bronze, iron, brass, etc.), wood, plastic, glass, porcelain and ceramic parts.

Properties:
• seizes in 60-90 minutes, complete drying in 24 hours;
• formula with the addition of steel powder;
• creates a heavy-duty connection;
• can be used as chemical welding;
• has high resistance to water, gasoline, antifreeze, detergents and most solvents;
• the glued product can be polished, drilled, painted;
• fills voids and cracks, restores the shape and volume of the product;
• glued products can be operated at temperatures from -40 ° С to + 121 ° С.

Clean and degrease the surfaces to be bonded.
Remove the cap and pierce the foil in both tubes.
Squeeze out an equal amount of resin and hardener and mix thoroughly until smooth.
Apply the composition in a thin layer to the bonded surfaces. Gently squeeze the parts.
Recommended application temperature is not lower than 10 ° С.